bristol, pa 19007-6810 usa tel (215) 781-9956 ? fax (215) 781-9845 printouts of this document may be out of date and should be considered uncontrolled ? info@arieselec.com www.arieselec.com features ? p b-free rohs/weee-compliant ? 8 -position soic footprint on the top and a circular, 8-pin jedec to can male pin footprint on the bottom. ics now available only in 8-position soic packages can be readily mounted on boards having jedec to thru-hole footprints without having to redesign the board. ? c onsult factory for mounting of consigned chips. general specifications ? a dapter board: 0.062 [1.58] thick fr-4 or is410 per ipc 4101a/26 with 1-oz. cu traces, both sides ? male pins : brass 360 1/2-hard per uns c36000, astm b16/b16m ? m ale pin plating: 10 [0.254] min. au per mil-g-45204 over 100 [2.54] ni per sae ams-qq-n-290 ? o perating temperature: 221f [105c] mounting considerations ? suggested pcb hole size : 0.028 0.003 [0.71 0.08] dia. 18013RC rev. aa rohs/weee-compliant soic-to-jedec to adapter ordering information p/n dim c 1109814-rc 0.200 [5.08] customization : in addition to the standard products shown on this page, aries specializes in custom design and production. special materials, platings, sizes, and configurations can be furnished, depending on the quantity. note : aries reserves the right to change product general specifications without notice. all dimensions: inches [millimeters] all tolerances: 0.005 [0.13] unless otherwise specified dip-to-to adapter also available. consult data sheet 18012 consult factory for other sizes and configurations
|
